Navigate
The Imaging Source Helpdesk
  • Register

  • or
  • Login
    Need a password reminder?
  • English
or
Contact Us
  • Get in touch

    Send us an email

  • Submit Community Topics

    Community Topics and suggestions submitted by customers like you

  • Start a chat session

  • Knowledgebase Read help articles
  • Community Custom suggestions
  • Contact Us We are here to help
  • Portal
  • Knowledgebase
  • General
  • Cameras on Raspberry PI, Odroid and NVidia TX
Download PDF

Cameras on Raspberry PI, Odroid and NVidia TX

S.Geißler
2019-10-01
in General

 You can use Raspberry PI 4, Odroid and NVidia TX as well as on x86 based platforms for our cameras.  The USB cameras are UVC compatible (or can be made by firmware update),  thus v4l2 is used, the GigE cameras use the Aravis library at https://github.com/AravisProject/aravis 

For a start please have a look at https://github.com/TheImagingSource/tiscamera . The Aravis library is included.

At https://github.com/TheImagingSource/Linux-tiscamera-Programming-Samples you will find additional programming samples.

Limitation: Older Raspberry PIs can not be used with GigE cameras, because they do not have an GigE Network interface. The USB 37U and USB 2 cameras can be used with these older ones.


Rate the quality of this page

This page was helpful :) :( This page was not helpful

Quick Jump
  • The Imaging Source Helpdesk
  • Knowledgebase
  • Community
  • Contact Us
Top
Helpdesk software provided by Deskpro